Liquor Shoppe works with many hardware devices. The hardware listed on this page has been tested by VMT Software. VMT Software does sell these hardware devices and our prices are competive.
Liquor Store Software Hardware Options
TSP100 Thermal Printer
The TSP100 futureprint is the first printer that is delivered with all necessary accessories. Everything, including the internal power supply, USB cable, wall and vertical mounts, driver CD, sample paper, quick set-up guide, power switch cover, and paper guide, are all shipped in one box.
Features
Internal power supply
High speed throughput: 25 receipts per minute
"Plug & Play" USB drivers
“Drop-In & Print” paper loading
All accessories included
All drivers and software included
Certified by major software houses
VMT highly recommends this printer. We have it here and have programmed several receipts for it. It is fast and reliable. It is easy to setup because it comes with a CD and a cable, unlike most other printers.

Magnetic Card Reader
Features
Fits in tight places.
The entire unit is just 90mm long (about the length of a credit card), giving it the smallest footprint of any unit with comparable features.
Edits and formats data.
The MiniMag is a fully intelligent swipe reader that can be programmed to divide, rearrange, edit, and validate fields of magnetic card data.
Reads magnetic stripes.
The MiniMag reads up to three tracks of information with a single swipe in either direction. Its standard-length slot makes it easy to use. Both beeper* and LED indicators signal a successful read.
Versatile, low cost.
The MiniMag Intelligent Swipe Reader can be used as a free-standing unit, or permanently mounted using the threaded inserts in the bottom of the reader. (The cable can exit through the bottom as well.) TTL, RS-232, keyboard wedge, and USB/Keyboard interfaces are available, as well as a port-powered version that utilizes an RS-232 interface but requires no power supply.
* Beeper not available with port-powered model.
Requirements
For our Software we recommend the reader must read at least tracks 1 and 2 to process credit cards. If you wish to make your own mag cards, buy an appropriate read/writer with the associated software.

Cash Drawers
Features
All Steel Construction with stainless steel front
Standard ABS plastic 6 coin/ 4 bill removable money tray
Push button side key lock for manual release
Off white powder coated finish or Gray as shown
Specifications
Dimensions:
18.8" W x 15.75" L x 4.4" H
Ambient temperature/humidity
Operating temperature: 0º C to +50º C
Operating Humidity :10% to 90% RH without condensation
Storage temperature :-20º C to +70º C
Storage Humidity 5% to 95% RH without condensation

Recommended Barcode Scanner
Features
Translucent Plastic Housing
USB Interface
Bright, Sharp and Focused Aiming Line
Powerful, Flexible Architecture
Increased Reading Distances
Real World Reading Performance
5 Year Warranty
Specifications
Performance
Illumination: 630 NM Visible Red LED
Receiving Device: 3648 element linear imager
Reading Distance: From 1 in. (2.5 cm) to 8 in. (20.3 cm) on medium density codes
Reading Width: 5 in. (12.7 cm) code width at 7 in. (17.8 cm) distance
Resolution: 5 mil. at 3.5 in. (8.8 cm) distance
Scan Rate: Programmable to 270 scans per second
Decode Rate: 270 decodes per second
Warranty: Five year factory warranty.
Call for Pricing: 1-800-457-7818